Pit bike parts

When it comes to pit bikes and their parts there should never be a question about their quality. As anyone who knows anything about the sport will attest, you cannot compromise on the overall condition of the parts. It would be foolish to prefer one part over another. No matter how well maintained your bike is overall, if the brakes don’t work properly neither does the bike itself. What teaches this us?

It teaches us that when it comes to pit bike parts that everything should be top notch and that there is always room for improvement. This also leads to the realisation that specialisation is a necessity in achieving the best results when it comes to racing.

This in short is the reason we at Dal Soggio Racing have decided to become involved in the creation of dirt bike parts. A dedication that flows from both our history in developing high-tech and our passion of motocross and enduro racing.

The result are pit bike performance parts. To be more specific, we have dedicated ourselves to produce front fork suspensions that goes beyond the expectations of any rider, experienced or novice.

Why did we choose to specialise in the development and distribution of suspension when it comes to pit bike parts. Well as stated before every part of a bike should be held to the highest standards. This can only be achieved if there is enough knowledge and experience with that particular part. In other words if you want to create the best product in its line you have to specialise. Our specialisation when it comes to pit bike parts comes down to the suspension, we believed there was still much to gain in the general quality and possibilities of these particular parts.

THE NEXT LEVEL IN PIT BIKE RACING PARTS

We set out to create a suspension that offers more than just comfort, endurance and safety. We believe that the right form of suspension doesn’t only effect the bike but the rider as well. Our system also provides tactile feedback to the racer and the ability to customize your riding experience. We offer pit bike race parts that allow you to maximize your talents and help you grow as a rider. But most of all we want people to enjoy riding their pit bikes as much as possible.

MAKING THE RIGHT CHOISES WHEN IT COMES TO PIT BIKE PARTS AND ACCESSORIES

As stated above, the development of high performance pit bike parts can only be achieved if the manufacturer has taken the necessary steps when it comes to perfecting their products. As we ourselves are great aficionados when it comes to the sport, understanding what a rider wants comes natural to us. We chose to spend all our development in one aspect of the bike. When buying a new bike you should in general be assured it is ready to go out of the box. Yet there is always room for improvement. Off course our pit bike parts are compatible with all important names out there.

It is our mission to create a suspension that goes beyond the expectations of any rider. We want to do our part in the evolution of the motocross sport and deliver not just a product but an experience.

Although we chose to focus on high-end pit bike parts we certainly don’t want people to think our products are exclusive. Our suspension systems are developed for every rider. Whether you’re a professional, a novice or just want to have fun with your bike, our products are there for you.

MAKE THE RIGHT CHOICE WHEN IT COMES TO YOUR PIT BIKE PARTS

If we don’t expect you to compromise while racing, why should you expect us to compromise in the development of our pit bike parts. As stated before we set out in the creation of our pit bike parts to give the rider the best experience while riding regardless of circumstances or the proficiency of the rider.

We also understood the importance of creating parts that are built to last and should be able to prevent unnecessary damages to the bike. Lastly we believe our system should be easy to install and maintain. Making important adjustments on the fly. Although for safety reasons we strongly suggest having your suspension installed by a someone fully capable of doing so.

The result are pit bike parts that can be considered high-end and high-tech in every aspect. Still we want to emphasise that our pit bike parts are there for everyone. Talk is cheap. What makes our suspension so unique and what gives it all these advantages?

THE MANY DIFFERENT ASPECTS OF OUR INNOVATIVE SUSPENSION

We really want people to understand our new and unique suspension system for dirt bikes. For many reasons, but to be honest mostly because we are proud of our work. The result of this work we called the SPHERE hydraulic cartridge. It is made out of 8 different parts, all playing their respective roll in giving you the greatest riding experience possible.

With a 38 clicks system the compression regulator allows for a very easy and adjustable regulation of the compression. The bleed valves are equipped to allow a precise internal pressure. This is guaranteed by having the bleed valves individually calibrated in a laboratory.

We understand the importance of a greater sensitivity to the front fork and know this is something many if not all riders desire. This is achieved by making sure the oil flow is greater and more precise. To achieve this we developed a compression piston with not 3 but 4 oil passages.

Also made from the material ERGAL 7075 and also equipped with 4 oil passages the rebound piston is also developed to decrease the wear of oil and shims. The Teflon treated slim band gives the hydraulic cartridge more sensitivity. The rebound regulator comes with a 38 clicks system that allows for an easy and extreme freedom in adjusting the rebound.

We fitted our pit bike parts with a fast preload. This way you can preload your fork quick and easy. Removing the hydraulic cartridge from the forks isn’t necessary.

Lastly we don’t want riders worrying about the dreaded slip-stick effect on the small movements of the shock absorber. The lip seal on the rod oil seal is fitted with a special profile.

OUR PIT BIKE PARTS ARE NOT JUST FOR ADULTS

Called the SPHERE NEW HEROES we developed a suspension system especially for the youngest of our riders. This suspension slightly differs from the SPHERE hydraulic cartridge. Mostly because we developed this system to be compatible with any KTM 65cc. You can make sure this system has been developed with as much care and precision as our other pit bike parts, KTM forks or FSR-48 forks. Especially when it comes to children, safety is always the most important concern.

WE OFFER ALL THE NECESSARY ACCESSORIES

No matter how good your suspension is, it is of no use without proper oil and shims. We say proper but we mean excellent. Our oil for example has been developed in cooperation with a notable company in the sector. The result is an oil that is anti-foam and -tear because of its unique blend. The oil is also capable of dealing with high temperatures and to protect against seal wear.

Off course we also offer several kits containing everything you need to fit, adjust and maintain the pit bike parts and different suspension systems. The shims might be the least exciting of all the components. Yet they have a vital role to play. You can expect the highest standard of quality when it comes to our specially designed shims.

WHERE ARE OUR PIT BIKE PARTS FOR SALE

We make use of a network of dealers all around the world. This way we can offer our pit bike parts to everyone who demands the finest when it comes to their pit bike and the parts.

Our pit bike parts are a labour of love and we are always looking to distribute our products to everyone who is interested. If you want to become a dealer all you have to do is simply contact us.

DAL SOGGIO RACING YOUR ITALIAN PARTNER FOR YOUR PIT BIKE PARTS

The main company Dal Soggio S.r.l has been around since the 50’s and has always been a developer of high-tech. With so much experience and with an undeniable love for motocross and enduro racing it isn’t hard to understand how Dal Soggio Racing came to be.

The Italian landscape offers some of the finest tracks and routes to test a dirt bike to its limits as well as its rider. With the countryside as our canvas, our passion for the sport and more than half a century of experience in high-tech the development of our pit bike parts seems only natural.

With success we might ad. The company and its riders have achieved many victories and successes both in national and international off-roads championships.

Would you like to learn more? Do you want to know where to buy our pit bike parts or how to become a dealer? You can find much on our website and our webshop. But you’re always welcome to contact us.

Need more information?

Fill in the form below and we will contact you shortly!

NEED MORE INFORMATION?

If you need more information about our products, don’t wait!

BECOME A DEALER?

Access to Dealers’ page and fill out the form to become one of us!

Tim

I want only the best for my customers and Dal Soggio’s products are a guarantee.

Justin

Trying to be aerodynamic as I could this week. Everyone on the team love that #dalsoggiorace suspension.

Mark

Very impressive products! I’ve bought a Sphere AER and it’s sure the best solution I may have taken.

By using the site, you accept the use of cookies on our part. more info

Questo sito utilizza i cookie per fornire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" permetti il loro utilizzo.

Chiudi